PACKET TRACER - CONNECT A ROUTER TO A LAN
Topology Addressing Table After Configuration IP address Objective Part 1 : Display Router Information Part 2 : Configure Router Interfaces Part 3 : Verify the configuration Background In this activity, you will use various show commands to display the current state of the router. You will then use the Addressing Table to configure router Ethernet interfaces. Finally, you will use commands to verify and test your configurations. Note : The routers in this activity are partially configured. Some of the configurations are not covered in this course, but are provided to assist you in using verification commands Part 1: Display Router Information Step 1: Display interface information on R1. Note: Click a device and then click the CLI tab to access the command line directly. The console ...